Mini 2G

Package contents / Product parts
General Information
These operating instructions are for the Trackimo Mini 2G GPS Tracker, which will simply be referred to as 'tracker' in the following. It contains importantinformation regarding set-up and operation.

Before using the tracker, please read the operating instructions carefully. This particularly applies to the safety notes. Failure to adhere to these operating instructions may result in severe injury or damage to the tracker.
The operating instructions are based on the standards and rules in force in the European Union.

When abroad, you must also observe country-specific guidelines and laws. Keep the operating instructions for future use. If you pass the tracker on to third parties, please be absolutely sure to include these operating instructions.
These operating instructions are for the Trackimo Mini 2G GPS Tracker, which will simply be referred to as 'tracker' in the following. It contains importantinformation regarding set-up and operation.

Before using the tracker, please read the operating instructions carefully. This particularly applies to the safety notes. Failure to adhere to these operating instructions may result in severe injury or damage to the tracker.
The operating instructions are based on the standards and rules in force in the European Union.

When abroad, you must also observe country-specific guidelines and laws. Keep the operating instructions for future use. If you pass the tracker on to third parties, please be absolutely sure to include these operating instructions.
Initial set-up
TURNING THE TRACKER ON

Connect the charging plug of the charging cable to the tracker with the magnetic charging port.

Press and hold the on/off button for at least 3 seconds. The green light on the front of the tracker should blink for a few seconds.

Put the tracker down and wait for at least 15 minutes.

1
2
3

The tracker will carry out initial GPS positioning. This is required for the device to function correctly. The tracker will then be ready for use and can be activated.

Please note: this procedure is only required the very first time the tracker is turned on.

ACTIVATING THE TRACKER

Download the V by Vodafone app from the Apple Store or Google Play store.

Register or log into your V by Vodafone account and click on the + button to add a device.

Insert your tracker IMEI and follow the instructions to activate your price plan.

1

Download the Trackimo app from the Apple Store or Google Play.

2
3
4

Register or log into your Trackimo account.

5

Select "Activate device" in the operation menu and follow the instructions.

6
Functions
Checking the connection
Checking the connection
SOS
Press the on/off button to check whether the tracker is on or off. If the green light comes on, the tracker is on. If no light comes on, the tracker is off.
You can check the tracker's activity by pressing the SOS button quickly. If the green light comes on, the tracker is activated.

Note: You can save battery life by increasing the tracking interval in the Trackimo app. As soon as the battery level is low, the red light will start to blink.
If you press the SOS button for at least 3 seconds, the location and a text message will be sent to the e-mail you have provided.
GEOFENCING

A geofence is a self-defined virtual boundary. You will receive a notification in the Trackimo app when the tracker leaves this area or goes into this area.

To create a geofence

1.
Select the tracker in the Trackimo app.
2. Click on "Fence".
3. Click on the "Create Fence" button.


A pink rectangular fence will be created around your device's current location (or in the centre of the map).


  • You can also enter an address to position a fence.
  • You can choose a pre-defined size.
  • You can change the size by making the sides of the rectangle bigger or smaller, or by moving the rectangle.

4. Once your fence has been created, you can give your geofence a name and click on "Save".

5. You will receive a notification in the Trackimo app every time your tracker enters or leaves this area. If you want to receive email notifications as well, tap on "Share", then on "New contact". You will then be able to add an email address for this alert.
SPEED ALERT
You will receive a notification in the Trackimo app when the tracker moves faster than the speed pre-defined by you.

1. Select the tracker in the Trackimo app.

2. Go to "Settings".

3. Enable the alert by checking the Speed alert box.

4. Enter a speed.

5. Add a contact where required.

6. Click on "Save".

7. If you want to receive a notification via email as well, go to the Settings area in the app, swipe right on the "Speed alert", then tap on "Share" then on "New contact". You will then be able to add an email address for this alert.
MOVEMENT ALERT
You will receive a notification in the Trackimo app when the tracker starts to move.

1. Select the tracker in the Trackimo app.

2. Go to "Settings".

3. Set the "Start moving alert" ON.

4. Enable the alert by checking the "Start Moving alert" box.

5. Click on "Save".

6. If you want to receive a notification via email as well, go to the Settings area in the app, swipe right on the "Moving Start alert", then tap on "Share" then on "New contact". You will then be able to add an email address for this alert.
LOW BATTERY ALERT
You will receive a notification in the Trackimo app when battery level is low.

1. Select the tracker in the Trackimo app.

2. Go to "Settings".

3. Set the "Low battery alert" ON.

4. Click on "Save".

5. If you want to receive a notification via email as well, go to the Settings area in the app, swipe right on the "Low battery alert", then tap on "Share" then on "New contact". You will then be able to add an email address for this alert.
Light and sound meaning
Action
Light
Switch On:
Press the ON / OFF button and hold for 3 sec.
Green light blinks three times and the tracker starts up.
Check if the device is to the mobile network:
Press the on/off button and quick release.
If device is connected:
Green light turns on for 3 seconds.

If device is not connected:
Red light blinks on and off for about 5 seconds.
When device connects with cellular network and GPS: Press the on/off button and quick release.
Blue light turns on for 3 seconds.
Check if the device is ON or OFF:
Press the on/off button quickly.
If the device is on, green lights turns on for 3 seconds. If it is off, no lights turn on.
Switch Off:
Press the on/off button and hold for 3 seconds.
Red light blinks three times, the tracker turns off.
Press the SOS button and hold for 2 seconds.
Green light Blinks twice.
Press the SOS button and hold for 2 seconds.
Green light blinks twice.
Low battery.
Red light blinks.
Battery is charging.
Red light blinks slowly.
Connected to a power source and battery is fully charged.
Red light solidly lit up.
Connected to a power source and battery is fully charged.
Red light solidly lit up.
Declaration of Conformity
The NDM Network hereby declares that the GPS tracker radio equipment model TRKM014 conforms with EU Directive 2014/53/EU. The full text for the EU Declaration of Conformity can be found on the following webpage: www.Trackimo.com/conformity
DISPOSING OF THE PACKAGING
Dispose of the packaging ensuring that materials are correctly separated. Dispose of cardboard and carton as waste paper and dispose of foils via the recyclable material collection service.
DISPOSING OF THE TRACKER
(Applicable in the EU and other European countries with systems of separately collecting waste and recyclables).

Old devices cannot be disposed of as household waste! If the tracker can no longer be used, all consumers are legally obligated to separate old devices from household waste, e.g. by disposing of them using a municipal/ district collection point. This ensures that old devices are properly recycled and avoids negative environmental impact. Therefore electronic devices are labelled with the symbol shown here. Batteries cannot be disposed of as household waste!

As a consumer, you are legally obligated to dispose of all batteries at a municipal/district collection point or at a retailer, regardless of whether or not they contain harmful substances*, so that they can be disposed of in an environmentally friendly way.

*labelled as: Cd = cadmium,
Hg = mercury, Pb = lead
Environmental Obligations
Green dot system represents that Trackimo fulfils the obligations of the national packaging laws (Packaging manufacturers, fillers, retailers and importers), have jointly decided to find an organization or system to which Trackimo can transfer their obligations. The task of these compliance schemes is to coordinate the collection, sorting and recycling of used packaging.