INSTALLING AND CHARGING THE BATTERY
When you unpack the tracker for the first time, the battery is empty. Charge it as follows:
Connect the charging plug of the charging cable to the tracker with Micro USB charing port.
Charge the tracker for 12 hours. The red light will blink whilst charging. When the tracker is fully charged. the light will turn solid red.
Connect the other end of the charging cable to the USB power adaptor and then to the power socket. Alternatively you can also connect the charging cable to a computer.
Disconnect the tracker from the charging cable.
Take the tracker outside so that it is in the open air.
Put the tracker down and wait for at least 15 min. The tracker will carry out initial GPS position. This is required for the device to function correctly. The tracker will then be ready for use and can be activated.
Press and hold the ON/OFF button for at least 3 sec. The green light on the front will start to flash.
Please note: this procedure is only required the very first time the tracker is turned on.
ACTIVATING THE TRACKER VIA WEB
Click on "Add tracker" and follow the on-screen instructions.
Insert your tracker IMEI and Device ID, and follow the instructions to activate your service plan.
Download the Trackimo+ app from the Apple Store or Google Play.
Register or log into your Trackimo+ account.
In the Devices tab click on "+" sign and follow the instructions.